We've all heard it before: In order to maximize motor unit recruitment
you need to... (insert your favorite recommendation here). If recruiting
a certain number of motor units allows for a certain amount of force
production, then recruiting more would allow for more force production.
It sounds like a great thing!
While increasing motor unit recruitment is one neural strategy for increasing
force production, it isn't the only one, and has very little to
do with increases in maximal force production.
Get ready to breakdown the nervous system's role in maximal force production
and learn how to manipulate it to improve your strength.
In order to understand how the nervous system adapts, we'll have to
go through some basic neuroanatomy and physiology. I know anatomy and
physiology can be an intimidating (or boring) subject, but try to stick
with me.
The first thing you need to understand is that you don't recruit muscle
fibers, you recruit motor units. A motor unit is a motor neuron and all
the muscle fibers it innervates. All motor neurons are located in the
ventral horn (front) of the spinal cord. The axons from these extend
out and divide to connect to the individual muscle fibers.
If a motor unit is recruited, all of the muscle fibers that are
innervated by that particular motor neuron produce force. This means
that, unless a motor unit consists of a motor neuron connected to one muscle
fiber (as far as I know, this has never been documented in humans), it's
impossible to recruit individual muscle fibers.
The motor unit is the most basic functional unit of the nervous system,
so it's important you wrap your mind around that. Got it? Okay, let's
move on to some more complex stuff.
Most motor signals originate in the motor cortex. In general, the descending
signals originate in the motor cortex, travel down a corticospinal pathway,
and synapse (connect) to a motor neuron in the ventral horn of the spinal
cord. The motor neuron then relays the message to the muscle fibers,
causing them to produce force.
You may notice that I keep saying that muscle fibers produce force and not that
they contract. Why? When most people hear
"contract," they think shortening. Muscles can produce force while shortening
(concentric), lengthening (eccentric), or not changing length (isometric).
What few people realize is that during movements where the total muscle
length is increasing, the muscle fibers may actually be shortening.
While a discussion on paradoxical movements of contractile and elastic
elements of muscle is beyond our focus, I wanted to bring this up for
one reason. We don't necessarily know if the contractile elements of
muscle are shortening or not during various movements. We do know that,
regardless of if the muscle is shortening, lengthening, or not changing
length, the muscle fibers are producing force.
And we're back. Now that you have a pretty good idea of the pathway
connecting the brain to the muscle, we can move on to discuss some of
the sites of neural adaptation.
In general, the nervous system balances excitation (+) and inhibition
(-) to achieve a desired result. Increased excitability of corticomotorneurons
in the motor cortex and motor neurons in the spinal cord has been documented
following training.(1, 2) If a neuron becomes more excitable, any given
signal will result in a larger response.
An excited neuron.
This may be a bit confusing. I've found an example with arbitrary units
(AU's) usually helps clear this up. Let's say there are 5 AU's that reach
a motor neuron in the spinal cord. The motor neuron processes these 5
AU's and sends 5 AU's to the muscle. Fourteen weeks of training later,
the excitability of this motor neuron increases. Now, for the same 5
AU's reaching the motor neuron from descending pathways (from the motor
cortex), 8 AU's are sent to the muscle. More AU's to the muscle means
more force production!
Other possible adaptations involve decreased inhibition from Renshaw
cells, Golgi tendon organs (muscle tension receptors), cutaneous and
other receptors, and descending influences from supraspinal areas (think:
brain). This is when things get a little complex.
The idea of increased force production due to decreased inhibition is
somewhat similar to the above example, but we add in a few more characters.
If 5 AU's leave the motor cortex on their way to the motor neuron, it's
possible that only 3 AU's reach the motor neuron, due to some form of
inhibition.
Inhibition that occurs before a signal reaches the motor neuron is referred
to as presynaptic inhibition. Decreased inhibition following training
may result in 4 AU's reaching the motor neuron. More AU's to the motor
neuron typically means more AU's to the muscle. Admittedly, this is an
overly simplistic look at inhibition, but it'll do for our purposes.
Still with me?
The reason this idea of excitation and inhibition can get so complex
is because of the synaptic organization of the nervous system. Essentially,
nothing is as basic as the two examples we've discussed. As an illustration
of such complexity, let's take a look at the Renshaw cell, named after,
you guessed it, Dr. Renshaw.
A Renshaw cell is a spinal interneuron. When a motor neuron in the spinal
cord sends a signal to the muscle, it also sends a signal to a Renshaw
cell. The Renshaw cell actually connects back to the motor neuron that
excited it, and inhibits it! The motor neuron excites the Renshaw cell;
the Renshaw cell inhibits the same motor neuron. This is known as recurrent
inhibition, which follows a different neural pathway than presynaptic
inhibition.
Why do we have this seemingly ridiculous connection? The presence of
the Renshaw cell allows for short latency (rapid) changes in motor neuron
signaling. If the motor neuron signals result in too much force production
to accomplish a particular task, Renshaw cell inhibition can decrease
the signal quantity very quickly, as opposed to having to wait for your
brain to process the situation and send down a new signal.
The quality and quantity of a motor neuron signaling is also affected
by sensory input from receptors in the skin, joints, muscle-tendon complex
(muscle spindles and Golgi tendon organs), and the vestibular system.
But we'll leave that for another day.
That's a relatively basic introduction to the nervous system. If maximal
force production is the goal, maximal excitation and minimal inhibition
should be the chosen strategy.
Most of you are probably more interested in how the nervous system functions
to produce and grade (or control) muscular force. There are five main
ways the nervous system does this:
1. Motor unit recruitment
2. Rate coding
3. Motor unit synchronization
4. Doublet firing
5. Alterations in antagonist activity
As we know, it's impossible to recruit individual muscle fibers. Instead,
we recruit motor units. Motor units are recruited in a very specific
pattern, from smallest to largest (3, 4), based on the size of the motor
neuron cell body.(5, 6) This means that the larger motor units have a
higher recruitment threshold. It also means that these large motor units can't be
recruited unless the smaller motor units are already active and stay
active.
Remember, a motor unit consists of a motor neuron and
all connected muscle fibers.
Relevant to this issue, I've heard coaches talk about the idea of targeting
low-threshold motor units through lower intensity training to achieve
hypertrophy of the innervated muscle fibers (supposed slow-twitch muscle
fibers). Hopefully someone can explain that concept better to me.
High-threshold motor units aren't recruited unless the task demands
higher amounts of force than the low-threshold units are capable of producing.
This means that as the high-threshold motor units are recruited, the
low-threshold units are active and firing at a maximal rate.
Consequently, high-intensity exercise leads to adaptations in low and
high-threshold motor units. Low-intensity training only leads to adaptations
in low-threshold units. If maximizing force production through neural
adaptations is your goal, low-intensity training seems illogical.
Smaller motor units produce small amounts of force, but are fatigue
resistant. Larger motor units produce large amounts of force, but are
highly fatigable. Some of you may be reading this and thinking that this
idea of low force/low fatigue, high force/high fatigue sounds like the
properties of slow-twitch and fast-twitch muscle fibers. A few years
ago, I would've agreed with you.
But now, research has shown us that swapping the nerve input to a slow-twitch
muscle fiber and a fast-twitch muscle fiber results in the slow-twitch
fiber producing high amounts of force and the fast-twitch fiber producing
low amounts.(7, 8) Just to upset all the muscle physiologists, it looks
like the force production capability of a muscle fiber is primarily dependent
on the neural input!
Rate coding simply describes the frequency of motor unit discharge.
Once a motor unit is recruited, it fires at an increasingly rapid rate
to produce increasing amounts of force. When a motor unit reaches its
maximal firing rate, additional motor units are recruited if further
increases in force production are needed.
Synchronization is an interesting occurrence that hasn't received enough
quality research attention. Basically, motor unit synchronization involves
two motor units firing at the same time or at a very short latency (less
than five milliseconds). This results in a rapid increase in force production,
as the second firing is able to take advantage of increased muscular
stiffness created by the first contraction.
One study showed that trained lifters had more synchronization than
skilled musicians (dominant and non-dominant hand) and untrained individuals
(dominant hand only).(9) It'd be a logical deduction that training results
in increased synchronization. While the research in this area is lacking,
another study found that 12 weeks of dynamic training didn't increase
the amount of motor unit synchronization.(10)
It's possible that some people just have more synchronization and gravitate
towards weightlifting because of their improved ability to produce force,
but I'm not sold on that argument. The synchronization changes following
training begs for further exploration.
Doublet Firing
Doublet firing involves the same motor unit discharging at a shorter
than normal latency. For instance, if a motor unit is firing every 15
milliseconds, and then fires twice within three milliseconds, the two
short latency firings would be considered a doublet. Doublet firing also
results in rapid increases in force production, as the second firing
is able to take advantage of increased muscular stiffness and increased
amounts of available calcium resulting from the first firing.
<!--
Doublets: They're twice the good.
-->
Doublets are usually followed by a longer than normal latency before
the next firing (11). Despite this long period with no firing, the increased
force production is maintained, even after the normal discharge pattern
has resumed. Research has shown increased occurrences of doublet firings
in ballistic contractions compared to slow contractions and an increase
in doublets following ballistic training. This supports the idea that
it's an efficient neural strategy to rapidly increase force production.(10)
This idea is pretty straightforward. If you want to perform a biceps
curl, you'd want maximal activation of your biceps and minimal activation
of your triceps, since triceps activity would somewhat cancel out biceps
force production.
Turning to another arbitrary unit example: If your biceps are producing
15 AU's to create elbow flexion and your triceps are producing 5 AU's,
the net effect will be 10 AU's of elbow flexion. If we cut the triceps
activity down to 2 AU's, the net effect will be 13 AU's of elbow flexion,
meaning more weight moved!
There's some research to suggest that training leads to decreased antagonist
activity.(12) I'll point out that some antagonist activity may be necessary
for joint stability. A great example of this is the muscles around the
knee. Quadriceps force production results in an anterior translation
of the tibia. While your anterior cruciate ligament (ACL) helps prevent
excessive motion in this direction, a certain amount of hamstring activity
will help take some of the strain off the ACL and keep your knees healthy.
In the next write-up, I'll go over the key fact that's frequently overlooked
in the neural mechanisms behind force production. Hint: It's the reason
why max strength isn't improved through recruitment!
Ask Me Anything I receive great questions in my T Nation Community Coaching Lab. If…
Ask Me Anything I get a lot of great questions in my T Nation Community…
An Exaggerated Warm-Up Isn't Helpful I don't know when the lengthy warm-up became a thing,…
Training and Your Metabolic State When I think "workout," I think of speeds. Your metabolic…